Send "QSY" on CW or if using phone, announce "the frequency is in use", then give your call and listen for a response
Send "QRL?" on CW, followed by your call sign; or, if using phone, ask if the frequency is in use, followed by your call sign
Send the letter "V" in Morse code several times and listen for a response or say "test" several times and listen for a response
Listen for 2 minutes before calling CQ
The antenna switch has been transferred to the test position.
A defective receiver.
Any of these.
The antenna or feedline has been damaged.
Messages concerning the Safety of Life At Sea (SOLAS).
Messages detailing important navigational warnings.
Messages containing information concerning the safety of a mobile unit or person.
Messages concerning On-scene communications.
A serious medical situation involving a crewmember.
Both a and b
Scenarios concerning the Safety of navigation or important meteorological warnings.
A crewmember over the side.
Transmit distress call by activating the radiotelegraph automatic alarm signal.
Switch off EPIRB and SART manually.
Transmit distress call by HF/MF/VHF DSC or Inmarsat.
Notify the RCC (Rescue Coordination Center) through VHF FM on channel 13.
It will appear on a radar unit's PPI as a line of dots radiating outward with the innermost dot indicating the SART's position.
It transmits "SOS" and the vessel's name and position in slow speed Morse Code.
It will appear on a radar unit's PPI as a line of dots radiating outward with the outermost dot indicating the SART's position.
None of the above.
Only outside of areas covered by VHF-DSC.
Only in areas beyond Inmarsat coverage.
At all times when underway.
When directed to do so by a cognizant rescue authority.
Leaking oil from a minor tank fracture.
A fire in the generator flat/spaces. A fire in the generator flat/spaces.
Answers a) and b) are both possible.
Treatment of crewmember breaking a leg in a cargo hold.
A cargo shift or weather situation considered to be of greater hazard than would justify a SAFETY priority designation.
Answers b) and c).
It is intended to provide more effective but lower cost commercial communications.
It is intended to provide compulsory vessels with a collision avoidance system when they are operating in waters that are also occupied by non-compulsory vessels.
It is intended to automate and improve existing digital selective calling procedures and techniques.
It is intended to automate and improve emergency communications in the maritime industry.
EPIRB on 121.5 MHz
VHF on Ch-16
VHF on Ch-70
SART on 9 GHz
Sea areas A1 and A2
Inland and coastal waters
Sea area A1
Coastal and international zones
Bridge-to-Bridge and general radio communications, RDF of EPIRB homing signals, Distress alerting and MSI.
Transmit distress alerts, SAR and on-scene communications, MSI, Bridge-to-Bridge and general radio communications.
SAR and on-scene communications, Bridge-to-Bridge and general radio communications, MSI and relay of satellite alerts from other vessels.
Distress alerting, MSI, SAR and on-scene communications & receipt of satellite alerts from other vessels.
Transmit and receive locating signals, send MSI to other ships via EGC, Bridge-to-Bridge communications
Transmit and receive locating signals, general communications and SAR communications.
Transmit and receive SAR communications, transmit Distress Alerts by at least one means, Bridge-to-Bridge communications.
Transmit and receive general communications, transmit Distress Alerts by at least one means, MSI.
选择要在Apple App Store上查看的Topgrade应用程序。