Qual MQF

qual-mqf

Exit

Question 1 of 1

Time Left

186818

120

block

Cautions and advisories are only displayed on the MFDs when the MFDs are in CDU back-up mode. Ref: 1V-22(C)B-1 Pg: 2-20

Select the correct answer(s).

(0/0)

186820

120

none

A _______ will cause a red "X" to be displayed behind the indicator for the invalid data, and the numerical data in the text box will remain readable, but the data should be considered inaccurate. Ref: 1V-22(C)B-1 Pg: 2-23

Select the correct answer(s).

(0/0)

186821

120

none

Gearbox warnings and cautions will still be provided and should be considered valid even if the primary gauge is displaying a RED "X" in front of or behind the gauge. Ref: 1V-22(C)B-1 Pg: 2-24

Select the correct answer(s).

(0/0)

186822

120

none

When no redundancy remains, the affected surface is displayed in _____ on the FCS/HYD system status layer. Ref: 1V-22(C)B-1 Pg: 2-118

Select the correct answer(s).

(0/0)

186823

120

none

All of the following are major sections of the engine except ____. Ref: 1V-22(C)B-1 Pg: 2-58

Select the correct answer(s).

(0/0)

186824

120

none

The torquemete assembly, located on the front of the engine, transmits engine output power, measures engine output power in terms of torque, provides the front engine mount, and provides a secondary ____ measurement. Ref: 1V-22(C)B-1 Pg: 2-58

Select the correct answer(s).

(0/0)

186825

120

none

Each engine is controlled by a dual-redundant electronic control system consisting of: Ref: 1V-22(C)B-1 Pg: 2-62

Select the correct answer(s).

(0/0)

186826

120

none

Allowing the engine to attain thermal stability prior to normal shutdown minimizes the possibility of thermal lockup as well as reducing hot section cooking. For these reasons, the normal shutdown procedure includes a -minute cool down to a stable MGT less than _degC at flight idle of below. Each engine is controlled by a dual-redundant electronic control system consisting of: Ref: 1V-22(C)B-1 Pg: 2-62

Qual MQF

Question 1 of 1

Time Left

Cautions and advisories are only displayed on the MFDs when the MFDs are in CDU back-up mode. Ref: 1V-22(C)B-1 Pg: 2-20

Select the correct answer(s).

(0/0)

A _______ will cause a red "X" to be displayed behind the indicator for the invalid data, and the numerical data in the text box will remain readable, but the data should be considered inaccurate. Ref: 1V-22(C)B-1 Pg: 2-23

Select the correct answer(s).

(0/0)

Gearbox warnings and cautions will still be provided and should be considered valid even if the primary gauge is displaying a RED "X" in front of or behind the gauge. Ref: 1V-22(C)B-1 Pg: 2-24

Select the correct answer(s).

(0/0)

When no redundancy remains, the affected surface is displayed in _____ on the FCS/HYD system status layer. Ref: 1V-22(C)B-1 Pg: 2-118

Select the correct answer(s).

(0/0)

All of the following are major sections of the engine except ____. Ref: 1V-22(C)B-1 Pg: 2-58

Select the correct answer(s).

(0/0)

The torquemete assembly, located on the front of the engine, transmits engine output power, measures engine output power in terms of torque, provides the front engine mount, and provides a secondary ____ measurement. Ref: 1V-22(C)B-1 Pg: 2-58

Select the correct answer(s).

(0/0)

Each engine is controlled by a dual-redundant electronic control system consisting of: Ref: 1V-22(C)B-1 Pg: 2-62

Select the correct answer(s).

(0/0)

Select the correct answer(s).

(0/0)

Results

Correct

0

Incorrect

0

Skipped

0

Overall Percentage

0%

Rate Quiz