Piping And Valves

piping-and-valves

Exit

Question 1 of 1

Time Left

151645

180

block

For power plants, materials used for the manufacturing of pipes must be:

Select the correct answer(s).

(0/0)

151646

180

none

Copper and copper alloy piping and tubing is not used in powerplants when:

Select the correct answer(s).

(0/0)

151647

180

none

Pipe fittings which are not clearly identified should be

Select the correct answer(s).

(0/0)

151648

180

none

The type of pipe flange gasket not in normal use today is the:

Select the correct answer(s).

(0/0)

151649

180

none

Gaskets are used in pipe flange joints to:

Select the correct answer(s).

(0/0)

151650

180

none

A good rule of thumb to use for the spacing of pipe supports in a piping system is every:

Select the correct answer(s).

(0/0)

151651

180

none

A mechanical steam trap:

Select the correct answer(s).

(0/0)

151652

180

none

Pipe is manufactured into two main categories, welded and ____

Select the correct answer(s).

(0/0)

151653

180

none

Relative to pipe and fittings, an anchor chair is used to:

Select the correct answer(s).

(0/0)

151654

180

none

A valve stamped with the following service symbol letters: G, A, and S stands for:

Select the correct answer(s).

(0/0)

151655

180

none

An insulation suitable for temperatures up to 454C is:

Select the correct answer(s).

(0/0)

151656

180

none

Insulating pipes, should prevent ____ on the pipe and consequent dripping and corrosion

Select the correct answer(s).

(0/0)

151657

180

none

Steam traps should be installed below the ____ point in the system

Select the correct answer(s).

(0/0)

151658

180

none

The inside diameter of a pipe is expressed as the:

Select the correct answer(s).

(0/0)

151659

180

none

The best material for gaskets and very high temperature areas would be:

Select the correct answer(s).

(0/0)

Results

Correct

0 Incorrect

0 Skipped

0 Overall Percentage

0%

Saving quiz

Save Score

Rate Quiz

Save Rating

Exit