Network + Configuring Routers and Switches

network-configuring-routers-and-switches

Exit

Question 1 of 1

Time Left

85052

120

block

Which of the following symbols indicates that you are in priv exec mode?

Select the correct answer(s).

(0/0)

Explanation

The # symbol is used in the prompt to indicate privilege exec mode.

85053

120

none

You wish to enable the interface on the Cisco router; what command would you use?

Select the correct answer(s).

(0/0)

Explanation

The no shutdown command is used to enable an interface on a Cisco device

85054

120

none

Which of the following commands would you use to assign an IP address to an interface?

Select the correct answer(s).

(0/0)

Explanation

To assign an IP address to an interface, you use the IP address command at an interface prompt.

85055

120

none

You want to ensure that the network interface on the router is using full duplex. What command would you use?

Select the correct answer(s).

(0/0)

Explanation

To configure the interface for full-duplex mode, you use the duplex full command at an interface prompt.

85056

120

none

Your manager is concerned about unauthorized systems being able to connect to the network. What feature of a switch can settle her concerns?

Select the correct answer(s).

(0/0)

Explanation

The port security feature allows you to specify the MAC addresses of systems that can connect to each port.

85057

120

none

Which of the following protocols is responsible for preventing loops on the network?

Select the correct answer(s).

(0/0)

Explanation

The Spanning Tree Protocol (STP) is designed to prevent loops on the network.

85058

120

none

Which of the following protocols are responsible for VLAN tagging? (Select two.)

Select the correct answer(s).

(0/0)

Explanation

802.1Q is the IEEE standard for VLAN tagging, while ISL is a Cisco protocol for VLAN tagging

85059

120

none

You are troubleshooting a system that cannot communicate with SERVER1 when connected to ports 1 through 6, but can when you connect the system to ports 8 through 12. What may be the reason?

Select the correct answer(s).

(0/0)

Explanation

If you are having trouble communicating with systems when connecting to a specific port on the switch, it could be because the port is part of a specific VLAN. Remember that you can only communicate with systems in the same VLAN.

85060

120

none

You are a router administrator, and clients on your network are having trouble communicating with a system that has the IP address of 122.34.5.4. You have verified that the IP configuration of your clients, including the default gateway setting, is correct. You can communicate with systems on your network and other networks. What should you check?

Select the correct answer(s).

(0/0)

Explanation

If you are having trouble communicating with a specific network, you should verify that there is a route to that network in the routing table on the router

85061

120

none

Your company policy is to have all network traffic sent to port 24 on the switch so that the administrator can have monitoring software check all network activity. What is the name of this switch feature?

Select the correct answer(s).

(0/0)

Explanation

Port mirroring is the feature on the switch that allows you to send a copy of all traffic to a specified port and monitor the traffic from that port.

Network + Configuring Routers and Switches

Question 1 of 1

Time Left

Which of the following symbols indicates that you are in priv exec mode?

Select the correct answer(s).

(0/0)

Explanation

You wish to enable the interface on the Cisco router; what command would you use?

Select the correct answer(s).

(0/0)

Explanation

Which of the following commands would you use to assign an IP address to an interface?

Select the correct answer(s).

(0/0)

Explanation

You want to ensure that the network interface on the router is using full duplex. What command would you use?

Select the correct answer(s).

(0/0)

Explanation

Your manager is concerned about unauthorized systems being able to connect to the network. What feature of a switch can settle her concerns?

Select the correct answer(s).

(0/0)

Explanation

Which of the following protocols is responsible for preventing loops on the network?

Select the correct answer(s).

(0/0)

Explanation

Which of the following protocols are responsible for VLAN tagging? (Select two.)

Select the correct answer(s).

(0/0)

Explanation

You are troubleshooting a system that cannot communicate with SERVER1 when connected to ports 1 through 6, but can when you connect the system to ports 8 through 12. What may be the reason?

Select the correct answer(s).

(0/0)

Explanation

Select the correct answer(s).

(0/0)

Explanation

Your company policy is to have all network traffic sent to port 24 on the switch so that the administrator can have monitoring software check all network activity. What is the name of this switch feature?

Select the correct answer(s).

(0/0)

Explanation

Results

Correct

0

Incorrect

0

Skipped

0

Overall Percentage

0%

Rate Quiz