Concrete Field Inspector Level 1 - Test A

concrete-field-inspector-level-1-test-a

Exit

Question 1 of 1

Time Left

367104

block

Reinforcement must be inspected and approved by the Enginner before the concrete is placed (Inspectors represent the Engineer)

Select the correct answer(s).

(0/0)

367105

none

Mechanical vibrators shall not be used on

Select the correct answer(s).

(0/0)

367106

none

When the comparison between QC and Verification compressive strength test results does not meet the comparison criteria

Select the correct answer(s).

(0/0)

367107

none

When placing concrete by troughs, chutes, or pipes, the combined length of the system cannot exceed _____ feet, unless authorized by the Engineer

Select the correct answer(s).

(0/0)

367108

none

The maximum water to cementitious material ratio for a class of concrete is

Select the correct answer(s).

(0/0)

367109

none

The proper time for applying curing compound to a deck surface is

Select the correct answer(s).

(0/0)

367110

none

A concrete mix design aprooved for use on your project will include

Select the correct answer(s).

(0/0)

367111

none

In order to minimize segragation, concrete must not be dropped more than ____ feet

Select the correct answer(s).

(0/0)

367112

none

Prior to and during the operation, measure the ambient air temperature, relative humidity and wind velocity with

Select the correct answer(s).

(0/0)

367113

none

Curing compound applied to slip from barriers must remain intact

Select the correct answer(s).

(0/0)

367114

none

Anchor bolts and dowels must be set in accordance with Section 460 of the specifications (Structural Steel and Miscellaneous Metals)

Select the correct answer(s).

(0/0)

367115

none

After the initial crack inspection the Engineer will monitor and document the growth of individual cracks to determine if cracks are active or dormant.

Select the correct answer(s).

(0/0)

367116

none

Freshly place concrete must be consolidated properly by the use of

Select the correct answer(s).

(0/0)

367117

none

MIX 02-8099 / TICKET # 123458 How many pounds of free water are from the coarse and fine aggregates in this load?

Select the correct answer(s).

(0/0)

367118

none

Concrete Field Inspector Level 1 - Test A

Question 1 of 1

Time Left

Reinforcement must be inspected and approved by the Enginner before the concrete is placed (Inspectors represent the Engineer)

Select the correct answer(s).

(0/0)

Mechanical vibrators shall not be used on

Select the correct answer(s).

(0/0)

When the comparison between QC and Verification compressive strength test results does not meet the comparison criteria

Select the correct answer(s).

(0/0)

When placing concrete by troughs, chutes, or pipes, the combined length of the system cannot exceed _____ feet, unless authorized by the Engineer

Select the correct answer(s).

(0/0)

The maximum water to cementitious material ratio for a class of concrete is

Select the correct answer(s).

(0/0)

The proper time for applying curing compound to a deck surface is

Select the correct answer(s).

(0/0)

A concrete mix design aprooved for use on your project will include

Select the correct answer(s).

(0/0)

In order to minimize segragation, concrete must not be dropped more than ____ feet

Select the correct answer(s).

(0/0)

Prior to and during the operation, measure the ambient air temperature, relative humidity and wind velocity with

Select the correct answer(s).

(0/0)

Curing compound applied to slip from barriers must remain intact

Select the correct answer(s).

(0/0)

Anchor bolts and dowels must be set in accordance with Section 460 of the specifications (Structural Steel and Miscellaneous Metals)

Select the correct answer(s).

(0/0)

After the initial crack inspection the Engineer will monitor and document the growth of individual cracks to determine if cracks are active or dormant.

Select the correct answer(s).

(0/0)

Freshly place concrete must be consolidated properly by the use of

Select the correct answer(s).

(0/0)

MIX 02-8099 / TICKET # 123458 How many pounds of free water are from the coarse and fine aggregates in this load?

Select the correct answer(s).

(0/0)

MIX 02-8099 / TICKET # 123458 What is the initial water-cementitious ratio (w/cm)

Select the correct answer(s).

(0/0)

Results

Correct

0

Incorrect

0

Skipped

0

Overall Percentage

0%

Rate Quiz