Code

code

Exit

Question 1 of 1

Time Left

151552

180

block

The ASME publication dealing with the care of heating boilers this

Select the correct answer(s).

(0/0)

151553

180

none

Before a fitting is to be constructed in the jurisdiction for use in the jurisdiction, application must be made to the Chief Inspector for

Select the correct answer(s).

(0/0)

151554

180

none

Definitions such as shift engineer, chief engineer and firemen are found in

Select the correct answer(s).

(0/0)

151555

180

none

Relative to boilers and pressure vessels, a code that has not been adopted by all provinces

Select the correct answer(s).

(0/0)

151556

180

none

Heating boiler means a boiler

Select the correct answer(s).

(0/0)

151557

180

none

What is the common name of refrigerant R-717 ?

Select the correct answer(s).

(0/0)

151558

180

none

For steam heating boilers, the relieving capacity will be such that the steam pressure will not rise to more than ________ kPa above MAWP

Select the correct answer(s).

(0/0)

151559

180

none

The Pressure Equipment Safety Regulations states welding or brazing procedure must comply with section ______ of ASME codes

Select the correct answer(s).

(0/0)

151560

180

none

For all refrigerant except _______, a vapour detector shall be located in an area where refrigerant from a leak is most likely to be detected

Select the correct answer(s).

(0/0)

151561

180

none

Certification is not required for heating plants rated at ______ kW or less

Select the correct answer(s).

(0/0)

151562

180

none

A jurisdictional safety codes act is

Select the correct answer(s).

(0/0)

151563

180

none

The ASME publication dealing with the care of heating boilers is section

Select the correct answer(s).

(0/0)

151564

120

none

When calculations are made with respect to the application of the Power Engineers Regulation, 10 kilowatts is equal to

Select the correct answer(s).

(0/0)

151565

180

none

Expected conduct during an examination for a certificate of competency is stated in:

Select the correct answer(s).

(0/0)

151566

120

none

Before an inspector issues the first certificate of inspection for any boiler and/or pressure vessel, he must make sure the vessel is ____ with the jurisdiction's identification number

Code

Question 1 of 1

Time Left

The ASME publication dealing with the care of heating boilers this

Select the correct answer(s).

(0/0)

Before a fitting is to be constructed in the jurisdiction for use in the jurisdiction, application must be made to the Chief Inspector for

Select the correct answer(s).

(0/0)

Definitions such as shift engineer, chief engineer and firemen are found in

Select the correct answer(s).

(0/0)

Relative to boilers and pressure vessels, a code that has not been adopted by all provinces

Select the correct answer(s).

(0/0)

Heating boiler means a boiler

Select the correct answer(s).

(0/0)

What is the common name of refrigerant R-717 ?

Select the correct answer(s).

(0/0)

For steam heating boilers, the relieving capacity will be such that the steam pressure will not rise to more than ________ kPa above MAWP

Select the correct answer(s).

(0/0)

The Pressure Equipment Safety Regulations states welding or brazing procedure must comply with section ______ of ASME codes

Select the correct answer(s).

(0/0)

For all refrigerant except _______, a vapour detector shall be located in an area where refrigerant from a leak is most likely to be detected

Select the correct answer(s).

(0/0)

Certification is not required for heating plants rated at ______ kW or less

Select the correct answer(s).

(0/0)

A jurisdictional safety codes act is

Select the correct answer(s).

(0/0)

The ASME publication dealing with the care of heating boilers is section

Select the correct answer(s).

(0/0)

When calculations are made with respect to the application of the Power Engineers Regulation, 10 kilowatts is equal to

Select the correct answer(s).

(0/0)

Expected conduct during an examination for a certificate of competency is stated in:

Select the correct answer(s).

(0/0)

Before an inspector issues the first certificate of inspection for any boiler and/or pressure vessel, he must make sure the vessel is ____ with the jurisdiction's identification number

Select the correct answer(s).

(0/0)

Results

Correct

0

Incorrect

0

Skipped

0

Overall Percentage

0%

Rate Quiz