Chapter 5.1 (21-40)

chapter-5-21-40

Exit

Question 1 of 1

Time Left

375370

180

block

A flashing white light signal from the control tower to a taxiing aircraft is an indication to

Select the correct answer(s).

(0/0)

Explanation

A flashing white light while operating on the ground means return to the starting point on the airport.

375371

180

none

An alternating red and green light signal directed from the control tower to an aircraft in flight is a signal to

Select the correct answer(s).

(0/0)

Explanation

An alternating red and green signal means the same whether you are in flight or on the ground – exercise extreme caution.

375372

180

none

While on final approach for landing, an alternating green and red light followed by a flashing red light is received from the control tower. Under these circumstances, the pilot should

Select the correct answer(s).

(0/0)

Explanation

An alternating red and green signal means exercise extreme caution. This is followed by a flashing red signal, which, in flight, means that the airport is unsafe.

375373

180

none

(Refer to figure 28) An aircraft departs an airport in the eastern daylight time zone at 0945 EDT for a 2-hour flight to an airport located in the central daylight time zone. The landing should be at what coordinated universal time?

Select the correct answer(s).

(0/0)

Explanation

To convert the local departure time to UTC, add 4 hours (0945 + 4:00 = 1345). Two hours later is 1545Z.

375374

180

none

(Refer to figure 28.) An aircraft departs an airport in the central standard time zone at 0v930 CST for a 2-hour flight to an airport located in the mountain standard time zone. The landing should be at what time?

Select the correct answer(s).

(0/0)

Explanation

Add 2 hours to the 0930 departure time to find the arrival time of 1130 CST. Since Mountain time is 1 hour earlier than Central, subtract 1 hour, for a landing time of 1030 MST.

375376

180

none

(Refer to figure 28) An aircraft departs an airport in the central standard time zone at 0845 CST for a 2-hour flight to an airport located in the mountain standard time zone. The landing should be at what coordinated universal time?

Select the correct answer(s).

(0/0)

Explanation

Departure time (0845) plus 2 hours is 1045 CST. Convert CST to UTC by adding 6 hours, for a landing time of 1645Z.

375377

180

none

(Refer to figure 28.) An aircraft departs an airport in the mountain standard time zone at 1615 MST for a 2-hour 15-minute flight to an airport located in the Pacific standard time zone. The estimated time of arrival at the destination airport should be

Select the correct answer(s).

(0/0)

Explanation

Add 2:15 to 1615 MST to find the arrival time of 1830 MST. Since Pacific time is one hour earlier than MST, the arrival time is 1730 PST.

375379

180

none

(Refer to figure 28.) An aircraft departs an airport in the Pacific standard time zone at 1030 PST for a 4-hour flight to an airport located in the central standard time zone. The landing should be at what coordinated universal time?

Select the correct answer(s).

(0/0)

Explanation

Add 4 hours to 1030 PST to find the arrival time of 1430 PST. To convert PST to UTC, add 8 hours. The landing time is 2230Z.

375380

180

none

(Refer to figure 28.) An aircraft departs an airport in the mountain standard time zone at 1515 MST for a 2-hour 30-minute flight to an airport located in the Pacific standard time zone. What is the estimated time of arrival at the destination airport?

Select the correct answer(s).

(0/0)

Explanation

Add 2:30 to 1515 to find the arrival time of 1745 MST. Convert MST to PST by subtracting 1 hour. The answer is 1645 PST.

375382

180

none

(Refer to figure 21.) (Area 3) What is the recommended communications procedure for a landing at Currituck County Airport?

Select the correct answer(s).

(0/0)

Explanation

The CTAF symbol is next to the frequency of 122.9. The normal procedure is to transmit intentions when 10 miles out and give position reports in the pattern.

375383

180

none

(Refer to figure 27.) (Area 2) What is the recommended communication procedure when inbound to land at Cooperstown Airport?

Select the correct answer(s).

(0/0)

Explanation

The CTAF/MULTICOM frequency, 122.9, is depicted next to the CTAF symbol. Pilots should broadcast intentions on this frequency when 10 miles from the field.

375385

180

none

When flying HAWK N666CB, the proper phraseology for initial contact with McAlester AFSS is

Select the correct answer(s).

(0/0)

Explanation

The callsign for a flight service station is its name, followed by the word “radio”. The aircraft’s full callsign should be given, using the phonetic alphabet.

375386

180

none

The correct method of stating 4,500 feet MSL to ATC is

Select the correct answer(s).

(0/0)

Explanation

Altitudes should be stated as individual numbers with the word hundreds or thousands added as appropriate. In this case, 4,500 feet should be read as “FOUR THOUSAND FIVE HUNDRED.”

375387

180

none

The correct method of stating 10,500 feet MSL to ATC is

Select the correct answer(s).

(0/0)

Explanation

See explanation for Question 5-33. In addition, for altitudes at and above 10,000 feet MSL, each digit of the thousands is pronounced, so that 10,500 becomes “ONE ZERO THOUSAND FIVE HUNDRED.”

375388

180

none

Prior to entering an Airport Advisory Area, a pilot should

Select the correct answer(s).

(0/0)

Explanation

A local nonautomated FSS provides airport and traffic advisories for an Airport Advisory Area.

Chapter 5.1 (21-40)

Question 1 of 1

Time Left

A flashing white light signal from the control tower to a taxiing aircraft is an indication to

Select the correct answer(s).

(0/0)

Explanation

An alternating red and green light signal directed from the control tower to an aircraft in flight is a signal to

Select the correct answer(s).

(0/0)

Explanation

While on final approach for landing, an alternating green and red light followed by a flashing red light is received from the control tower. Under these circumstances, the pilot should

Select the correct answer(s).

(0/0)

Explanation

(Refer to figure 28) An aircraft departs an airport in the eastern daylight time zone at 0945 EDT for a 2-hour flight to an airport located in the central daylight time zone. The landing should be at what coordinated universal time?

Select the correct answer(s).

(0/0)

Explanation

(Refer to figure 28.) An aircraft departs an airport in the central standard time zone at 0v930 CST for a 2-hour flight to an airport located in the mountain standard time zone. The landing should be at what time?

Select the correct answer(s).

(0/0)

Explanation

(Refer to figure 28) An aircraft departs an airport in the central standard time zone at 0845 CST for a 2-hour flight to an airport located in the mountain standard time zone. The landing should be at what coordinated universal time?

Select the correct answer(s).

(0/0)

Explanation

(Refer to figure 28.) An aircraft departs an airport in the mountain standard time zone at 1615 MST for a 2-hour 15-minute flight to an airport located in the Pacific standard time zone. The estimated time of arrival at the destination airport should be

Select the correct answer(s).

(0/0)

Explanation

(Refer to figure 28.) An aircraft departs an airport in the Pacific standard time zone at 1030 PST for a 4-hour flight to an airport located in the central standard time zone. The landing should be at what coordinated universal time?

Select the correct answer(s).

(0/0)

Explanation

(Refer to figure 28.) An aircraft departs an airport in the mountain standard time zone at 1515 MST for a 2-hour 30-minute flight to an airport located in the Pacific standard time zone. What is the estimated time of arrival at the destination airport?

Select the correct answer(s).

(0/0)

Explanation

(Refer to figure 21.) (Area 3) What is the recommended communications procedure for a landing at Currituck County Airport?

Select the correct answer(s).

(0/0)

Explanation

(Refer to figure 27.) (Area 2) What is the recommended communication procedure when inbound to land at Cooperstown Airport?

Select the correct answer(s).

(0/0)

Explanation

When flying HAWK N666CB, the proper phraseology for initial contact with McAlester AFSS is

Select the correct answer(s).

(0/0)

Explanation

The correct method of stating 4,500 feet MSL to ATC is

Select the correct answer(s).

(0/0)

Explanation

The correct method of stating 10,500 feet MSL to ATC is

Select the correct answer(s).

(0/0)

Explanation

Prior to entering an Airport Advisory Area, a pilot should

Select the correct answer(s).

(0/0)

Explanation

Results

Correct

0

Incorrect

0

Skipped

0

Overall Percentage

0%

Rate Quiz