flap placard speed

speed can be selected more than flap and gear placard speed and less than minimum speed on mcp

stall warning activation speed

minimum speed

gear placard speed

speeds greater than vmo/mmo cant be selected on mcp

vmo/mmo

speeds greater than vmo/mmo can be selected on mcp

if there is a discontiniuty

vorloc or app course intercepted

hdg select is selected

end of active route

lnav deselected

loss of capture criteria

in case of go around

False

True

both FDs must be on before starting takeoff to engage TOGA mode

command

Blank

CWS

FD

GS and Loc Captured and when descending through 1500 feet

when descending 800 feet with GS and Loc captured

GS and LOC captured

0—50000ft

0—41000ft

TO,TO1, TO2

CLB, CLB1, CLB,2

CRZ, GA, CON

(—-) fmc not computing any thrust limit

info

D-TO, D-TO1, D-TO2

When above 2000 ft with flaps not up or GS captured

below 2000 ft RA

with or without afds is engaged

when AP is not engaged

engages automatically in climb level change engaged. (except 2.5 mins after lift off)

n1 automatically engages in climb vnav engaged

when set with outer knob, n1 limit indicators are followed automatically by A/T

push to N1 when illuminated, AT engages im arm, N1 deselected, light extinguished.

active route entered

peformance dsta entered and executed.

lnav selected prior to TOGA

first leg is in 5 degrees of runway track

origin runway in flight plan

GA mode engaged and below 400 RA

TO mode engaged and below 400 ft

APP engaged with GS and LOC captured

after second autopilot coupled during dual channel at 1500 ft

FL260

FL240

FL280

switching both flight directors off below 400 ft

changing roll mode above 400 feet

engaging autopilot above 400 feet. n1/roll/mcp speed if vnav is not armed with a/p engagement.

changing pitch mode above 400 feet

Enter answer text

flaps not up and

in flight and

speed is more then +10 and -5 kts when flaps up and not approaching commanded value and

speed defers more than +10 kts or -5 kts and not approaching commanded value and