Aerial Operation Skill

Uitgang

Vraag 1 of 1

  Tijd Over


0
559464
0
240
block

AERIAL OPERATION SKILL INSTRUCTIONS – To be read to the Candidate The candidate will safely demonstrate the proper method for spotting, setting and operating the aerial device. You are asked to set the ladder at a safe climbing angle for roof operations on a designated building. Upon completion of the ladder set, you will re-bed the ladder and return the apparatus to road ready within the allotted time. Failure to complete the skill in the allotted time will constitute failure of the entire skill.

Overeenkomen met de tekst (klikken en slepen)   

(0/0)



Zoek de tekst op

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23
Klik en sleep

Proper positioning

*Places all four jack plates and deploys all four jacks completely on jack plates

Completes Skill in 12 minutes or less

Verbalizes ladder is set and ready for climbing

Returns apparatus to road ready, including generator and PTO

Ladder in low idle coming out of cradle

Turns on the Master Power Switch

Ensures all jack lights and green interlock lights are on

*Sets the parking brake

Places apparatus in neutral

Use high idle at appropriate times

Smooth operation of ladder

Ensures the jack/ladder switch is in the ladder position

Excites the generator

Engages Aerial PTO

Brings ladder down and smoothly places in cradle

*Sets outriggers with both levels in green

*While standing on the turn table, candidate verbalizes there are no overhead obstruction prior to raising ladder out of bed

Chock the wheels

Confirms the ladder is pinned for rescue operations and not elevated master streams

*All tires off the ground or remove bulge from tires

Ensures the jack/ ladder switch is in the Jack position

Ensures jack/ladder switch is in the jack position